HG protective coating matt finish 1L bottle, the basis for good natural stone maintenance. Product 34. HG protective coating matt finish is a unique and easy to apply liquid polymer emulsion. This emulsion forms a wafer-thin yet extremely protective coating when it dries. The ideal start for good natural stone floor maintenance. Protects the top layer against wear and damage Provides a matt finish Extremely simple to apply Unique natural stone protective coating with anti-slip effect The protective coating protects the top layer of natural stone against wear, scratches, damage by acids from soft drinks, wine and other damages. This protective coating for natural stone floors also has an anti-slip effect. Coverage 1 litre is sufficient for approximately 40 m2 . This product is also available in a gloss version. How do you use HG protective coating matt finish? Follow the steps below for correct use of HG protective coating matt finish. Do not shake before use, instead turn the bottle upside down a number of times to mix the contents well without foaming. Preferably apply with a waxer for even application. Pour the liquid undiluted over the floor and then apply evenly in one direction without putting pressure on the waxer or squeegee. Once the product has dried (after about 60 minutes), a second layer can be applied in the same direction onto the first layer. If you want to learn more about HG products then visit the HG website, or contact us.